Common Type of Radon Mitigation Systems

Plan to Reduce Radon Level? Here’s the Common Type of Radon Mitigation Systems

We can say that radon is rarely discussed about, but it is surely a threat for any homeowner and resident. In case you haven’t tested your home or building for radon, it is recommended to do it immediately since radon can be everywhere. When it is found that the level of radon in your home is a bit high, mitigation must be performed right away.

Common Type of Radon Mitigation Systems

Common Type of Radon Mitigation Systems

4 Common Types of Radon Mitigation System

The purpose of any radon mitigation system is to diminish the amount or level of radon in your home. Once you come to a radon mitigation contractor, there is no doubt that you will be served with some choices of mitigation system that can be applied in your home. To help you learn more about these types of mitigation system, check this out.

#1 Active Suction

This radon mitigation system is commonly used for homes which have gradient basements or concrete slab basements since radon gas is more likely to build up beneath the basement foundation concrete. This system is called this way because it includes electrical vent fan, a vent pipe situated between sub-slab gravel which draws out above the roof and also an electrical examining system.

#2 Passive Suction

When your home is being constructed, the typical radon mitigation system used is the passive suction. This system is performed with the aim that you don’t require an active prompt for ventilation like electrical fan used in active suction system. In this system, a duct system is typically applied as well to benefit the air flow to steer the radon out from your home.

radon reports

radon reports

#3 Pressure Systems

When it comes to pressure system, it is more about your intervention than a system like some of the mentioned above. This method concerns you as the homeowner to keep your doors and windows closed in your home’s lower sections more frequent. Basically, you will create force by having air pressured in to your home. This force will prevent radon gas to come up.

#4 Sub-membrane

The last but not least, there is sub-membrane mitigation system. This system is particularly useful in a home which acquires a crawlspace, even more when the floor id loose gravel or dirt. In this case, the crawlspace floor will be covered by using heavy plastic sheet. A channel is going to be made and finally a pipe and fan which guides to outdoors are installed.